FlowPointTELEMETRY

RTU20 Config

Not connected
FlowPoint Telemetry · RTU20

Configure an RTU20 without reprogramming

The forms come from the RTU itself (cfg.schema), so new firmware settings appear here without updating this page.

Connect over USB

Plug the RTU's USB port into this computer and pick its serial port. Needs Chrome or Edge on a PC.

Try the demo

A simulated RTU with the real settings list and factory values exported from firmware 20.2.0.

Open API traffic at the bottom to see every JSON request and reply.

API traffic→ sent   ← received